Fast, easy and cost-effective: the advantages of the SKF Vertevo speedi sleeve for mechanics
When replacing a crankshaft seal, mechanics often find that the shaft surface is too worn for a proper seal, leading to persistent oil leaks. In the past, the only solutions were either replacing the crankshaft—an expensive and time-consuming process—or re-machining the surface, which required specialized tools and additional labor. Fortunately, there is now a simpler and more cost-effective solution: SKF Vertevo Speedi Sleeve.
2025-04-16
It is a thin-walled stainless steel sleeve designed to restore a smooth sealing surface on worn shafts. Instead of replacing or machining the crankshaft, mechanics can simply slide the sleeve over the worn area, providing a durable and high-quality surface that extends the life of the crankshaft. It is faster, more affordable, and ensures a longer-lasting repair compared to traditional methods.
One of the key advantages of SKF Vertevo Speedi Sleeve is that it eliminates the need for a new seal size. The original seal can still be used, fitting snugly onto the newly restored surface. This not only simplifies repairs but also reduces inventory costs for workshops.
How to install it?
It is a straightforward process. First, the crankshaft surface should be cleaned, ensuring there are no burrs or rough spots that could affect the fit. Then, the diameter of the shaft must be measured at different points to determine the correct sleeve size. Once positioned correctly over the worn area, the sleeve is gently tapped into place using the included installation tool. If necessary, a non-hardening sealant can be applied to enhance the fit.
After installation, it’s important to check for any burrs that could damage the seal. Before installing the seal, the sleeve should be lubricated to ensure smooth operation.
How to remove it?
Although it is designed for long-lasting performance, it can be removed if necessary. This can be done by applying heat to expand the sleeve or using a small hammer to relieve tension. In some cases, a cold chisel or wire cutters can be used to carefully cut and remove the sleeve. However, it’s important to note that this is a one-time-use component and cannot be reused.
Why to choose SKF Speedi Sleeve?
It offers a quick, reliable, and cost-effective solution for worn crankshaft surfaces. By eliminating the need for costly replacements or time-consuming machining, it helps mechanics complete repairs faster and with greater confidence. If you're looking for a way to prevent oil leaks, extend crankshaft life, and reduce repair costs.
Information from: TT08_021 speedi-sleeve installation
Releated
2025-04-16
When replacing a crankshaft seal, mechanics often find that the shaft surface is too worn for a proper seal, leading to persistent oil leaks. In the past, the only solutions were either replacing the crankshaft—an expensive and time-consuming process—or re-machining the surface, which required specialized tools and additional labor. Fortunately, there is now a simpler and more cost-effective solution: SKF Speedi Sleeve.
2024-05-28
The braking system is one of the most critical components of a vehicle and has a direct impact on safety. Among the various elements within this system, brake pads are crucial. They ensure that the vehicle stops safely and effectively, making the choice of high-quality pads essential. With more than a century of experience, SKF excels in the development of OE and Aftermarket solutions, including brake rotors with integrated bearings, and offers nearly 900 different brake pad sets for different applications.
2023-01-16
For a steer axle with a 12,000-lb. rating, commonly-accepted pressure is 110 psi, and most drivers assume 85 psi is okay. But for every 10% of underinflation, you’re looking at a 1% reduction in fuel economy. Multiply that by the miles you travel in a year and you can expect:
2023-01-16
We are used to driving our cars with the only concern being when we we need to schedule regular maintenance, but there are some dangerous issues we can avert from happening just by being aware of some not-so-subtle symptoms.
2023-01-16
The wheel bearings on your car can last a lifetime or may not last very long. It all depends on several aspects that we will discuss below. Before talking about replacing wheel bearing, let’s take a quick look at what can cause it to fail.
2023-01-16
It is not necessary to replace both at the same time, however, it is highly recommended due to a high risk of engine damage. All parts of the synchronous drive have the same mileage and wear. If one of the parts is not replaced and loaded again by the timing belt adjustment, this can lead to a failure after a short time. Also, this could save money in the long run as the mechanic only has to do the work to get to the synchronous drive once.
2023-01-16
The timing system is a crucial part of the four-stroke internal combustion engine. Its components drive the synchronized rotation of the camshaft(s), ensuring the engine’s inlet and outlet valves open and close at the proper times. This means that if any of the timing components fail, the car will no longer operate properly, which can cause costly damage to the engine.
2023-01-16
How to grease your vehicle's wheel bearings and which lubricant should be used? SKF has some tips for you on how to take care of your bearings.
2023-01-16
Driveshafts transfer engine torque from the gearbox to the wheel hub at a constant rate, without friction variations or play in cars equipped with an independent suspension system. Driveshafts need to bear stress without creating additional inertia dur to their weight.