What is included in a timing belt kit?
In the engine, what allows the correct synchronization between the crankshaft and the camshaft is the timing system. This movement is produced by one of two elements: a timing belt or a timing chain. In this article, we tell you which components are included in the SKF timing belt kit.
2023-01-16
Timing belt kit: all you need to know
What is included in the SKF timing belt kit?
- Kits include the correct belt for your application in trusted OE quality.
- Premium quality tensioners and idler pulleys.
- Nuts, bolts, screws, and other fasteners where necessary.
- Quality components ensuring optimum belt tension under all driving conditions.
- Specific fitting instructions including correct torques and step-by-step installation instructions downloadable from the QR code on the box.
Installing the SKF timing belt kit ensures consistent performance throughout the transmission system, which is such a critical area for the engine.
Each SKF timing belt kit contains the same components that manufacturers include in the engine assembly, guaranteeing the quality of the original kit.
How long do timing belts last?
A very common belief is to think that the timing belt can last longer than the time specified by the car's manual, but the truth is that if we wait for longer, we risk a critical failure, either if the timing belt breaks or the water pump fails, the damage to the engine will be extreme. SKF timing belts are known by mechanics to be durable and resistant, but in general, from SKF we always recommend following the car's official maintenance schedule to make sure that important parts such as the timing belt are in good condition.
SKF timing belts are known by mechanics to be durable and resistant, but in general, from SKF we always recommend following the car's official maintenance schedule to make sure that important parts such as the timing belt are in good condition.
On the other hand, it has also been seen that water pumps do not last much longer than belts, so it is a good habit to do both replacements together.
How to replace the timing belt with a water pump
Are our timing belts with water pump hard to replace? As with any other part of car maintenance, you could replace the timing belts yourself. However, SKF recommends is that timing belt replacement should be done by a professional. This is a process that must be done with proper application safeguards, and if you fail in any part of the process and end up breaking the engine, you will find yourself with an expensive problem to solve.
SKF Timing belt kits with water pump
SKF offers high-end precise timing belt kits for most of the car models on the market. By using one of our kits, you are assured of a high-quality product to be fitted to your car, thereby increasing the life of your engine, and you can live with the peace of mind of having the top of recline products looking after your car. Our Timing belt and water pump kits include everything needed to perform a complete engine timing belt kit and water pump replacement. The same kit usually fits several models of a brand, or even several brands, which means that you should look at the available kits and check beforehand if the one you are looking for really fits your model.
Releated
2025-04-16
When replacing a crankshaft seal, mechanics often find that the shaft surface is too worn for a proper seal, leading to persistent oil leaks. In the past, the only solutions were either replacing the crankshaft—an expensive and time-consuming process—or re-machining the surface, which required specialized tools and additional labor. Fortunately, there is now a simpler and more cost-effective solution: SKF Speedi Sleeve.
2024-05-28
The braking system is one of the most critical components of a vehicle and has a direct impact on safety. Among the various elements within this system, brake pads are crucial. They ensure that the vehicle stops safely and effectively, making the choice of high-quality pads essential. With more than a century of experience, SKF excels in the development of OE and Aftermarket solutions, including brake rotors with integrated bearings, and offers nearly 900 different brake pad sets for different applications.
2023-01-16
For a steer axle with a 12,000-lb. rating, commonly-accepted pressure is 110 psi, and most drivers assume 85 psi is okay. But for every 10% of underinflation, you’re looking at a 1% reduction in fuel economy. Multiply that by the miles you travel in a year and you can expect:
2023-01-16
We are used to driving our cars with the only concern being when we we need to schedule regular maintenance, but there are some dangerous issues we can avert from happening just by being aware of some not-so-subtle symptoms.
2023-01-16
The wheel bearings on your car can last a lifetime or may not last very long. It all depends on several aspects that we will discuss below. Before talking about replacing wheel bearing, let’s take a quick look at what can cause it to fail.
2023-01-16
It is not necessary to replace both at the same time, however, it is highly recommended due to a high risk of engine damage. All parts of the synchronous drive have the same mileage and wear. If one of the parts is not replaced and loaded again by the timing belt adjustment, this can lead to a failure after a short time. Also, this could save money in the long run as the mechanic only has to do the work to get to the synchronous drive once.
2023-01-16
The timing system is a crucial part of the four-stroke internal combustion engine. Its components drive the synchronized rotation of the camshaft(s), ensuring the engine’s inlet and outlet valves open and close at the proper times. This means that if any of the timing components fail, the car will no longer operate properly, which can cause costly damage to the engine.
2023-01-16
How to grease your vehicle's wheel bearings and which lubricant should be used? SKF has some tips for you on how to take care of your bearings.
2023-01-16
Driveshafts transfer engine torque from the gearbox to the wheel hub at a constant rate, without friction variations or play in cars equipped with an independent suspension system. Driveshafts need to bear stress without creating additional inertia dur to their weight.